P167000

With the Tripp Lite P167-000 HDMI Over Cat-5 Wall Plate Kit, you can locate an HDMI-enabled display up to 230' away from the HDMI source using readily available Cat-5 or Cat-6 UTP cable (for best performance, use solid wire). The wall plate extender consists of a passive wall plate at the source side and an active wall plate with built-in signal regenerator at the display side. Simply run two Cat-5/6 UTP cables between the two wall plates and plug in standard Tripp Lite HDMI patch cables to the HDMI source and the display. The green LED on the display wall plate lets you know that power and a signal are coming from a connected source. The red LED indicates only a signal is being received. The Tripp Lite P167-000 HDMI Over Cat-5 Wall Plate Kit is functioning properly when the unit is connected to a display and the green LED is lit.